Use of Data Masseuse gives lighting designers a new freedom in colored lighting and lighting effects design with track mounted fixtures that was not previously possible. Color Kinetics Data Masseuse contains the electronics and technology to enable C-Series Track fixtures to be controlled by an external controller. Data Masseuse includes a slew-rate limited amplifier, which processes a DMX512 signal. This signal is then distributed to each C-200T fixture on the track. With Data Masseuse, the track itself can be arranged in any topology, including any number of branches and Ts up to 100 feet. Also, installations can include a virtually unlimited number of C-200T fixtures without the strict termination and repeater requirements of DMX512. Without Data Masseuse, data streams to the light fixtures risk corruption, resulting in erratic performance. Installation of Data Masseuse is simple. Electrical connections are made with flying leads and wirenuts. Data Masseuse is a single, self-contained unit in a black anodized aluminum housing, and fits in a standard four-gang wall box.

iW Data Enabler is an indoor/outdoor data-formatting device designed specifically for Color Kinetics products that feature Powercore digital power processing technology. The compact device is housed in a compact NEMA 4 (IP66) enclosure for use in dry, wet and damp environments

PDS-500e, is the Power/Data supply that powers iColor Accent, a Color Kinetics UL Class 1 listed fixture. With 500 Watts of power, short circuit protection, and diagnostic LEDs to assist with the correct installation of Color Kinetics lighting systems, PDS-500e is a robust power and data solution. PDS-500e features a built-in ventilation fan as well as an automatic over-temperature shut-off to protect it from damage due to overheating. Automatically accommodating supply voltages of 100 VAC or 240 VAC

PDS-60ca 12V is a streamlined, cost-effective solution that blends power and intelligence for use in dry, wet and damp environments. PDS-60ca 12V is designed to convert Ethernet, DMX, and pre-programmed information into data that can be understood by each individual light. Used with Light System Manager, it allows the lights in a network to be automatically discovered, addressed or added to the sequence. PDS-60ca 12V is engineered for use with Color Kinetics' Chromasic based iColor Flex SLX.

Color Kinetics PDS-60ca 7.5V intelligent, indoor/outdoor, power/data supply is specifically designed for Color Kinetics 7.5 volt Chromasic fixtures. PDS-60ca 7.5V provides a robust 62W power source and a choice of intelligent data drivers. The available data drivers condition data supplied from Ethernet or DMX512 controllers, including Color Kinetics full line of controllers, to a format compatible with the fixtures.

Color Kinetics Power/Data Adapter provides a convienent way to use C-Series fixtures with the PS60 Power Supply. The Power/Data Adapter contains a five pin screw terminal block for direct connection to the power/data cable. The Adapter's RK45 data port accepts data to control lighting colors and effects. The female BNC connector accepts power from the PS60.

Power Supply, 12W, N. American Wall Mount (0.66A). For use with iW Translator and scene controller

PDS-60 24V is a streamlined, cost-effective solution that blends power and intelligence for use in dry, wet and damp environments. PDS-60 24V offers a choice of intelligent data drivers that condition data supplied from DMX or Ethernet controllers. The compact, IP-66 rated device supports Color Kinetics' intelligent LED illumination systems, except those driven by Chromasic technology (which are supported by PDS-60ca).

PDS-60ca 24V is a streamlined, cost-effective solution that blends power and intelligence for use in dry, wet and damp environments. PDS-60ca 24V is designed to convert Ethernet, DMX, and pre-programmed information into data that can be understood by each individual light.

PDS-60ca 24V is a streamlined, cost-effective solution that blends power and intelligence for use in dry, wet and damp environments. PDS-60ca 24V is designed to convert Ethernet, DMX, and pre-programmed information into data that can be understood by each individual light.

PDS-70mr 24V is an integrated power/data supply designed for use with iColor MR g2. The compact, IP66-rated device applies Color Kinetics patented Smartjuice technology to multiplex power and data over a 2-wire circuit. It supports DMX or Ethernet controls, including Color Kinetics complete line of controllers, as well as pre-programmed effects. One PDS-70mr 24V powers up to 14 iColor MR g2 lamps.

PDS-150e, designed for Color Kinetics UL Class 2 listed fixtures, is a robust power and data solution. PDS-150e provides 150 Watts of power, short circuit protection, and diagnostic LEDs to assist with the correct installation of Color Kinetics lighting systems. Additionally PDS-150e features a built-in ventilation fan as well as an automatic over-temperature shut-off to protect it from damage due to overheating.

The Philips Lighting sPDS-60ca is a 24 volt power supply that is used for the Philips iColor Cove EC, QL, eW Flex SLX and the QLX model. The power supply is UL listed for dry locations. sPDS-60ca 24v Data Sheet | sPDS-60ca 24v User Guide

sPDS-480ca 7.5V is an intelligent, rackmount power/data supply specifically designed for Color Kinetics 7.5 volt Chromasic fixtures. This robust 480 watt power source is universal and ideal for large installations. sPDS-480ca 7.5V features on-board system configuration and monitoring capabilities. The integration of power and data simplifies fixture wiring, and the built-in configuration tools make initial setup and testing easy, without the need for additional equipment. The data circuitry translates data supplied from Ethernet controllers, including Color Kinetics Light System Manager and Video System Manager, to a format compatible with the fixtures.